Pompes d'alimentation de broyage de broyeur
Pompes d'alimentation de broyage de broyeur
Pompes d'alimentation de broyage de broyeur
Pompes d'alimentation de broyage de broyeur
Pompes d'alimentation de broyage de broyeur
Pompes d'alimentation de broyage de broyeur
Pompes d'alimentation de broyage de broyeur
Pompes d'alimentation de broyage de broyeur
Pompes d'alimentation de broyage de broyeur
Pompes d'alimentation de broyage de broyeur

1 / 4

Pompes d'alimentation de broyage de broyeur

  • $5000.00

    ≥1 Set/Sets

envoyer une demande
Model No. : 65ZJW
Brand Name : Naipu
Type : Clay Wet Sand
Casting Method : Thermal Gravity Casting
Sand Core Type : Clay Sand Core
Application : Machinery Parts
Machining : Boring Machine
Material : Steel
Surface Treatment : Sand Blast
Surface Roughness : Ra0.4
Standard : GB
Certification : ISO 9001:2008
65ZJW Feeding Pumps : 65
plus
7yrs

Shijiazhuang, Hebei, China

Visiter le magasin
  • Fournisseur or
  • Certification de plate-forme
  • Certification SGS
  • Expo en ligne

Description du produit

65 pompes d'alimentation de filtre-presse zjw

Pompes à boues centrifuges horizontales en porte-à-faux/pompes à boues revêtues de caoutchouc/pompes à boues R55/pompes à boues à joint de presse-étoupe/pompes à boues à joint centrifuge/pompes à boues en caoutchouc résistant à l'usure/pompes à boues interchangeables/pompes à boues de lavage de charbon/manipulation des boues de gravier et de sable pompes/pompes de traitement de flottation de minéraux/pompes de lavage de charbon/pompes d'alimentation


La pompe d'alimentation du filtre-presse de la série Naipu® NP-ZJW accepte la conception hydraulique unique et le mode d'installation du

roue à aubes, assurez-vous que sa courbe de performance de pompe est plus raide que les pompes normales, est plus approprié à utiliser dans le

L'alimentation du filtre-presse varie en fonction des changements de résistance afin de réaliser la grande capacité,

alimentation basse pression et faible capacité, filtre haute pression. La pompe est largement utilisée dans la laverie à charbon,

protection de l'environnement, usine d'aluminium, fonderie, etc.



Plan de construction

drawing-1





Le schéma de structure de la pompe d'alimentation

1.Volute biphasée 2. Roue biphasée

3.Volute monophasée 4.Plaque arrière

5.Salle d'alimentation 6.Localisation du buisson

7.Expulseur 8.Plaque de couverture d'expulseur

9. Corps de décompression 10. Roue monophasée

11.Tie-bar 12.Manchon d'arbre

13.Couvercle 14.Anneau de démontage

15.Plaque de retenue d'eau 16.Roulement

17.Arbre 18.Douille entretoise de roulement

19.Couvercle de roulement 20.Cadre

21.Tuyau coudé



TABLEAU DE SÉLECTION DE LA POMPE NP-ZJW

selection chart



PARAMÈTRES DE PERFORMANCE DE LA POMPE D'ALIMENTATION NP-ZJW

Performance Parameters


Présentations des produits :

Filter Press Photos


Défauts et règlements possibles.


        Faults

    Reason

      Settlement

1.Pump fails to discharge any water,The hand of pressure gauge beat violently

1.Suction pipe don`t have enough water.

2.Suction pipe blocked or the valve is locked.

1. Inject enough water

2.unlock the inlet valve,clear the blocks

3.Exclude the air leakage

2.The pump can`t discharge water,the hand of vacuum meter beat heavily.

1.The inlet valve is unlocked or silted up.

2.The resistance of suction pipe is too big or silted up.

3.The height of suction is too high.

1.Unlock the valve or desilting

2.improve the design of  suction pipe or desilt

3.Lower the height of the installation.

3.The pump can`t discharge water,pressure gauge shows heavy pressure.

1.The resistance of the discharge pipe is too big.

2.The impeller blocked

3.The speed is slow.

1.Check and adjust the outlet pipe.

2.Clear the impeller

3. Improve the speed.

4.The pump doesn`t rotate

The volute is silted up by the blocks.

Clear the blocks

5.The capacity is not enough

1.The blocks of the impeller or the inlet or outlet pipe.

2.The abrasion of the impeller is heavily.

3.The speed is low to normal

4.Pump is installed unreasonably or the leakage of the inlet pipe.

5.The transporting height is too high,the loss of the resistance of the inside pipe are too big.

6.The inlet valve not open enough or blocked

7.The packing seal leaks

1.Clear the impeller or pipe.

2.Change the impeller

 

 

3.Adjust the speed

4.Install again or stop leaking.

 

 

5.Decrease the height of the transport or reduce the resistance.

6.Unlock the inlet valve

 

7.Compress the packing tightly

6.The motor of the pump is overloaded

1.The head of the pump exceeds the head of the working condition.

2.Not consider the slurry density when selecting the pump.

3.The packing press tightly

1.Turn down the outlet valve,cut the impeller or lower the speed.

2.Select the motor again.

3.Adjust the the screw of the  packing gland

7.Abnormal sound in the pump, and no water out

1.The resistance of the inlet pipe is too big.

2.The height of the suction is too high.

3.Cavitation occurred

4.there is air in the inlet

5.The temperature of the liquid is too high

1.Clear the suction pipe and sluice valve.

2.Lower the height of the suction

3.Adjust the water valve and let the pump operate in the defined limits.

4.Block the leakage.

5.Lowering the liquid temperature.

8.pump vibrates

1.pump cavitate

2.The block of the impeller single vane

3.The no concentricity  between the pump shaft and motor shaft

4.Fasteners or foundation loose

1.Adjust the water valve ,lower the height of the installation,reduce the resistance of the inlet.

2.Clear the impeller

3.Alignment again

4.Fasten the screw,and reinforce the foundation.

9.Bearing is overheat

1.lock the cooling water

2.lubrication is not good.

3.the lubrication oil is not clear

4.the wrong direction of the thrust bearing.

5.there is something wrong with the bearing.

1.Open the cooling water

2.Adjust the oil quantity

3.Clear the shaft,change oil

4.According to the inlet pressure,adjust the direction of the thrust bearing.

5.Change the bearing

10.Packing short life

The material of packing is not good

Change the packing

11.pump leak oil

1.High oil level

2.The rubber parts invalid  

3.Assembly problem

1.Lower the oil level

2.Change rubber spares

3.Adjust the assembly

 

12 Pump head leaking

1.The rubber parts not press well

Assembly again or press tightly 





FAQ:

Q1. Êtes-vous une usine de fabrication?

Oui, nous sommes l'usine de fabrication directe et avons plus de 10 ans d'expérience dans ce domaine.

Q2.Avez-vous des produits en stock à vendre ?

Certains que nous avons en stock, mais pas les autres. Puisque nous fabriquons toujours ces produits selon les exigences des clients.

Q3.Quels avantages avez-vous ?

A: nous sommes fabricant direct et le prix est compétitif.

B: notre ingénieur est très expérimenté dans ce domaine et nous pouvons vous fournir un service OEM.

C: nous sommes usine, et nous pouvons organiser le calendrier de production, de manière à une livraison ponctuelle.


Détails du contact:

Pompe Cie., Ltd de Shijiazhuang Naipu.

Ajouter: No.368 Xinshi North Road, zone de développement de l'industrie de haute technologie de Shijiazhuang, Hebei, Chine, 050091.

Tél : 0086-311-897162903

Télécopieur : 0086-311-87162902

Personne à contacter : Karen Tan

Skype : karen_naipump











envoyer une demande

Alerte du produit

Abonnez-vous à vos mots clés intéressés. Nous enverrons librement les produits les plus récents et les plus chauds de votre boîte de réception. Ne manquez aucune information commerciale.