Video
1 / 4
Model No. : | CXLD |
---|---|
Brand Name : | Cx |
place of origin : | China |
Kaifeng, Henan, China
Description du produit
Le flux électromagnétique Kaifeng Chuangxin 'est composé de capteur et de convertisseur. Il se présente sous deux formes: de type compact et de type distant. Le type à distance nécessite également un câble blindé à double couche spécial pour connecter le convertisseur et le capteur. Il existe sept types de matériaux d'électrodes et quatre types de matériaux de doublure disponibles pour les capteurs.
Le principe de mesure de l'écoulement électromagnétique est basé sur la loi d'induction électromagnétique de Farady. Le capteur est principalement composé de tubes de mesure avec une doublure isolat, une paire d'électrodes installées par pénétration de la paroi du tube de mesure, une paire de bobines et un noyau de fer pour produire un champ magnétique de travail.
Caractéristiques:
Ø Non affecté par la densité du fluide, la viscosité, la température, la pression et la conductivité;
Ø Aucune pièce mobile dans le tube de mesure, aucune perte de pression et les exigences inférieures pour les sections de tuyaux droits.
Ø B Système de mesure d'idirection avec trois totaliseurs intégrés, total vers l'avant, total inversé et total de différence;
Ø Afficher le flux avant et inversé, plusieurs sorties: courant, impulsion, communication numérique, HART;
Ø Matériaux de sélection raisonnable de la doublure et de l'électrode, excellente résistance à la corrosion et résistance à l'usure;
Ø E xcitation Mode C Onverter avec une consommation d'énergie lO , un point zéro stable et une grande précision.
Ø Utilisation de la technologie de montage de surface (SMT), avec une sortie d'alarme d'auto-test et d'auto-diagnostic, une sortie d'alarme de détection de charge vide, une sortie d'alarme supérieure et de limite inférieure, un contrôle par lots et d'autres fonctions .
Ø Grâce à des boutons tactiles infrarouges, le réglage des paramètres est pratique et la programmation est fiable .
Item
|
The Specifications of electromagnetic flowmeter
|
Installation Type
|
Split/remote
|
Measuring fluid
|
conductive fluid and slurry
|
Caliber
|
DN6-DN3000
|
End connection
|
Flange, threaded, clamping, insertion type, etc.
|
Electrode materials
|
Mo2Ti , Hastelloy C, Hastelloy B, Pt Ta Ti
|
Flange standard
|
GB, DIN, JIS, EN, SABS, etc.
|
Lining Material
|
PTFE, PFA (resistance to negative pressure), chloroprene rubber, polyurethane, hard rubber (optional conductive ground rubber), F46
|
Electrode Type
|
Standard type 316L, scraper-type (DN ≥ 50)
|
Dielectric conductivity
|
≥5μs/cm (water≥ 20μs/cm)
|
Accuracy grade
|
±0.5% RS.
|
Flow Range
|
0-10m/s
|
Maximum temperature
of medium |
For rubber liner ≤ 80 °C, for PTFE liner ≤ 120°C
|
Ambient temperature
|
-20 - +60
|
Working pressure
|
0.6Mpa-4.0Mpa, the special high rpressure is available
|
Protection Level
|
IP65, IP67, IP68 (optional)
|
Power
|
220VAC(85~250 voltage) 24VDC(11~40 voltage)
|
Display
|
Forward and backward instantaneous flowrate, total flow, velocity, flowrate percentage with back light
|
Output
|
4-20mA current output ,0-1kHz frequency output, pulse output per unit volume
|
Communication
|
RS485 and Modbus, RS232 and Modbus, HART, Profibus, GPRS, etc.
|
Electrode Material
|
Application
|
Molybdenum-containing stainless steel (0Cr18N12Mo2Ti)
|
Applicable to industrial/municipal water, wastewater and low corrosive mediums.
Widely used in petroleum, chemical industries. |
Hastelloy B
|
Strong resistance to hydrochloric acids below the boiling point.
Resist against oxidable acids, alkali and non-oxidable salts. For instance, vitriol, phosphate, hydrofluoric acids, and organic acids. |
Hastelloy C
|
Exceptional resistance to strong solutions of oxidizing salts and acids.
For example, Fe+++, Cu++, Nitric acids, mixed acids |
Titanium
|
Titanium can withstand corrosive mediums such as seawater, chloride salt solutions, hypochlorite salts, oxidable acids(including
fuming nitric acids), organic acids, and alkali. Not resistant to high purity reducing acids such as sulphuric acids, hydrochloric acids. |
Tantalum
|
Highly resistant to corrosive mediums.
Applicable to all chemical mediums except Hydrofluoric Acids, Oleum and Alkali. |
Platinum-iridium
|
Applicable to all chemical mediums except for Ammonium salts and Fortis.
|
Liner material |
Main performances |
Applicability |
Polytetrafluoroethylene (PTFE) |
1.It is a plastic material with the stablest Chemical properties, resist the corrosion of Boiling Hydrochloric acid, sulfuric acid, nitric acid, aqua regia, Concentrated alkali and many kinds of organic solvent, unable to resist the corrosion of chlorine trifluoride, high Temperature vanadyltrifluoride, high flow-rate liquid fluorine, liquid oxygen and ozon; 2.Poor abrasion resistance; 3.Poor ability of anti-negative pressure. |
1.100℃,150℃(special order required); 2.Strong corrosive medium like concentrated acid , alkali, etc.; 3.Sanitary medium. |
Polychloroprene rubber (Neoprene) |
1.Excellent elasticity, high degree of tensile strength,good wear resistance; 2.Able to resist the corrosion of generally low concentration acid, alkali and salt, unable to resist that of the oxidative medium. |
1.80℃,120℃(special order required); 2.General water, polluted water, weak wear ability mud and ore pulp. |
Polyurethane rubber (PU) |
1.Excellent wear resistance (ten times of the natural rubber’s); 2.Poor abrasion resistance of acid and alkali; 3.Not able to work with water mixed with organic solvent. |
1.<80℃; 2.Middle and strong wear ability ore pulp, coal pulp, mud, etc.. |
PFA |
Having the same abrasion resistance with PTFE.Having strong ability of load pressure resistance. |
1.Below 220℃ 2.Applicable in state of load pressure. |
F46 |
1.Have the same abrasion resistance with PTFE. 2.Resistable for low abrasion. 3.Having strong resistance to load pressure. |
1.Below 220℃ 2.The same as PTFE. 3.Applicable in mediums of low abrasion. |
Video
Kaifeng, Henan, China
Envoyez votre demande à ce fournisseur