identifier Rejoindre gratuitement
1 / 5
Application Charge Post Z3 7KW
Options:
- CW-JL-Z3/384.8 * 249.8 * 129 PC operating ver
| Model No. : | CW-JL-Z3 |
|---|---|
| Specification : | CW-JL-Z3/384.8 * 249.8 * 129 PC operating version (APP) |
Yangjiang, Guangdong, China
- Fabricant
- Fournisseur or
- Certification de plate-forme
Description du produit
|
Product Name |
Charging Post Z3 7kw light guide column section |
|
Model |
CW-JL-Z3 |
|
Specification |
CW-JL-Z3/384.8 * 249.8 * 129 PC operating version (APP) |
|
Charging mode |
Two-dimensional code scanning charge |
|
Means of communication |
Either 4G or GPRS |
|
The length of the gun line |
5M (optional non-standard length) |
|
human–computer interaction |
RGB light strip |
|
Rated Voltage |
Single-phase three-wire 220VAC |
|
Rated power |
7KW(220VAC) |
|
Working Frequency |
45~65Hz |
|
Max. Rated Current |
32A |
|
Operating Temp |
.-40℃—+50C |
|
Protection Class |
IP65 |
|
Number Of Jacks |
New national standard 7 holes |
|
General Standard |
GB/T 18487.1-2015，GB/T34657.1-2017; |
|
Protection function |
Under-voltage, over-voltage, over-current, over-heat, short circuit, leakage, full automatic stop, ungrounded protection |
|
Warranty |
One-year replacement, three-year warranty, lifetime maintenance |
|
Precautions |
1, when installed in open-air places, it is recommended to be equipped with electrical boxes. 2. Make sure the ambient temperature is between -20 ° C and + 50 ° C. Keep away from open fires or baked goods and avoid high temperatures. 3. There should be no strong vibration, inflammable and explosive materials near the installation site, and good ventilation. Shall not be placed in corrosive, corrosive or humid air. Adequate space for cooling and ventilation must be reserved. 4. The installation shall not be located in low-lying areas or in areas prone to water accumulation. The installation site shall not be higher than 2000m above sea level. 5, bracket installation without wall support, it is recommended to use wall-mounted installation, if the use of floor-mounted bracket, fixed installation. Pile installation, should ensure that the pile vertical, and avoid vehicles may pass the route. |
2.Connectez le pistolet de charge vers le port de charge du véhicule électrique, le voyant est toujours allumé en bleu, indiquant une connexion réussie. Invitée par l'application à commencer la charge, le voyant indicateur éclate en vert, indiquant une charge normale.
3. Application de fin de charge: Cliquez sur "Arrêtez la charge" sur l'application ou appuyez sur le bouton du pistolet pour arrêter de charger. Augmentez le pistolet de charge du connecteur du véhicule et remettez-le en place, les arrêts de charge.
Yangjiang, Guangdong, China
- Fabricant
- Fournisseur or
- Certification de plate-forme
Envoyez votre demande à ce fournisseur