identifier Rejoindre gratuitement
1 / 5
Henghong Mineral Equipment For Gold ,Silver ,Copper
| Model No. : | 6-S |
|---|---|
| Brand Name : | Henghong Mineral Gold Equipment |
| Type : | Gravity Separator |
Ganzhou, Jiangxi, China
- Fabricant
- Service
- Société de commerce
- Service OEM
- Certification de plate-forme
Description du produit
Henghong Mineral Equipment For Gold ,Silver ,Copper
Description of Mineral Gold Equipment
Mineral Gold Equipment sometimes also known as wet tables, consist of a vibrating riffled deck mounted on some type of support. A motor, usually mounted separately off to the side, drives a small arm that shakes the table along its length. The riffles are usually not more than half an inch high and cover only about half the table surface. Varied riffle designs are available for specific types of applications. Shaking tables are very efficient at recovering heavy minerals from minus 100 microns (150 mesh) down to 5 microns in size. Heavy minerals of a size greater than 150 mesh are better run through a jig.
Application of Mineral Gold Equipment
Mineral Gold Equipment is a mine separation device for fine minerals working by gravity. They are effective in processing precious and base metal, rare metal and non-metallic minerals, widely used in separation for Gold, Silver, Tin, Columbium, Tantalum, Titanium, Barium, Tungsten, Iron, Chrome, Manganese, Zircon, Lead, Zinc, Mercury, Copper, Aluminum, etc.
Mineral Gold Equipment is one of the main equipment of gravity concentration , it is widely used in the selection of tungsten, tin , tantalum, niobium and other rare metals and precious metal ore .
It can be used for Roughing, concentrating, scavenging different operations , Separating coarse sand ( 2- 0.5mm) , fine sand ( 0.5 - 0.074mm ), slime or clay ( -0.074mm ), different grain grade size . Can also be used to separating the iron, manganese ore and coal . When processing other minerals such as tungsten, tin , the table effective recycling particle size range for the 2-0.22 mm.
Working principle of Mineral Gold Equipment
Mineral Gold Equipment beneficiation process is conducted in a copy of the tilt table, ore grain group from the Angle of mesa feeder trough into, by lateral flushing water supply for the sink at the same time, under the influence of vibration wave, according to the proportion and granularity theory, and vertical movement and lateral movement. YanTai proportion and granularity of different ore grain along the movement direction of the respective trapezoidal shed, respectively from the concentrate and tailings discharge side of different position, the final is divided into concentrate, middlings and tailings.
A choice of 6-S Fixed type Mineral Gold Equipment 6-S Small Channel Mineral Gold Equipment and 6-S big Channel Support Mineral Gold Equipment are available.
|
|
6-S Fixed Type Mineral Gold Equipment
Without mounting bracket, the use of the installation takes the mound to cement casting pile to put shaking table, not convenient to move, but relatively save cost, users can according to the economic situation to decide.
|
|
|
6-S Small Channel steel support Mineral Gold Equipment The price is reasonable, being loved and esteemed by the customers. We recommend order this one.
|
|
|
6-S Big Channel steel support Mineral Gold Equipment
|
|
|
6-S Double Deck Mineral Gold Equipment
|
Feathers of Mineral Gold Equipment
-Classification, Concentration, Recovery of Metals, Minerals from Placer or Alluvial Fields.-Works as a Wash Plant, Gravity Separation Plant for small to medium size Dredging Operation.
-Classification, Pre-Concentration & Recovery of Primary (Hard Rock) deposits of Gold, Base Metals, Ferrous Metals, Diamonds and other Minerals.
Technical parameter of Common size Mineral Gold Equipment
|
Name |
Coarse sand surface of table |
Fine sand surface of table |
Ore slime surface of table |
|
|
Table surface Dimension |
Length (mm) |
4450 |
4450 |
4450 |
|
Transmission end width (mm) |
1855 |
1855 |
1855 |
|
|
crude ore width (mm) |
1546 |
1546 |
1546 |
|
|
Max. feeding size (mm) |
2 |
0.5 |
0.15 |
|
|
Feed amount (t/h) |
30-60 |
10-20 |
15-25 |
|
|
Feed density (%) |
25-30 |
20-25 |
15-25 |
|
|
Capacity (t/h) |
0.6-2.5 |
0.6-2.5 |
0.6-2.5 |
|
|
Stroke (mm) |
16-22 |
11-16 |
8-16 |
|
|
Frequency ( f) |
45-48 |
48-53 |
50-57 |
|
|
Water quantity added(t/h) |
80-150 |
30-60 |
10-17 |
|
|
2°30′-4°30′ |
1°30′-3°30′ |
1°-2° |
||
|
Longitudinal obliquity (°) |
1.4 |
0.92 |
-- |
|
|
Dressing Area (m2) |
7.6 |
7.6 |
7.6 |
|
|
Cross-section Shape of table surface |
Rectangular |
Saw tooth |
triangle |
|
|
Motor Power (kw) |
1.1 |
1.1 |
1.1 |
|
|
Transmission Mechanism |
Eccentric linkage |
|||
Head motion:Tin Mining Equipment cast iron to contain an oil reservoir for perfect splash lubrication. This feature protects the moving parts, reducing operating and maintenance costs to a minimum.
The Mineral Gold Equipment In Our Workshop
Delivery of our Mineral Gold Equipment
The Our Mineral Gold Equipment Used in one mine site
Welcome to visit our factory in your free time
Here is Bella Chen ,Always being on serve you ,We Cherish every order from every customer:
Skype :bella.chen66
Whatsapp :0086-15170603870
Ganzhou, Jiangxi, China
- Fabricant
- Service
- Société de commerce
- Service OEM
- Certification de plate-forme
Envoyez votre demande à ce fournisseur