1 / 5
Model No. : | ASTM A513 |
---|---|
Brand Name : | TORICH |
Type : | Seamless |
Ningbo, Zhejiang, China
Description du produit
Description du produit:
Fournisseur et fabricant de tubes en acier DOM de Chine, offre des prix bas, de l'acier spécial d'ingénierie de haute qualité, des tubes en acier sans soudure DOM, des tuyaux en acier DOM, etc.
Catégorie d'acier / matériau en acier:
Composition chimique (analyse de coulée) a
Steel Grade | % by mass | ||||||
Name | Number |
C max |
Si max |
Mn max |
P max |
S max |
Altot min |
E215 | 1.0212 | 0.10 | 0.05 | 0.70 | 0.025 | 0.015 | 0.025 |
E235 | 1.0308 | 0.17 | 0.35 | 1.20 | 0.025 | 0.015 | - |
E355b | 1.0580 | 0.22 | 0.55 | 1.60 | 0.025 | 0.015 | - |
a Elements not included in this table (but see footnote b) shall not be intentionally added to the steel without the agreement of the purchaser, except for elements which may be added for finishing the cast. All appropriate measures shall be taken to prevent the addition of undesirable elements from scrap or other materials used in the steel making process. b Additions of Nb, Ti and V are permitted at the discretion of the manufacturer. The content of these elements shall be reported. |
Propriétés mécaniques à température ambiante
Steel Grade | Yield strengtha | Tensile strength | Elongation | |
Name | Number |
ReH min Mpa |
Rm min Mpa |
A min % |
E215 | 1.0212 | 215 | 290 to 430 | 30 |
E235 | 1.0308 | 235 | 340 to 480 | 25 |
E355 | 1.0580 | 355 | 490 to 630 | 22 |
a For tubes with outside diameter ≤ 30 mm and wall thickness ≤ 3 mm, the ReH minimum values are 10 MPa lower than the values given in this table. NOTE: The steel grades defined in this part of EN 10305 have an intrinsic minimum transverse impact energy of 27 J at 0 °C. |
Condition de livraison:
+ N
Gamme de taille:
OD: 4.0-220mm
WT: 0,5-30 mm
Longueur: max 7000mm
Caractéristiques du tube en acier DOM:
Bonne concentricité
Bonne tolérance OD et ID
Haute précision
Qualité stable
Rugosité douce
ASSURANCE QUALITÉ TORICH
Notre compagnie:
Contrôle de qualité:
FAQ:
A: Un inventeur, fabricant et fournisseur professionnel de matériaux pour tuyaux en acier
Un: généralement il est 7-14 jours si les marchandises sont en stock. ou c'est 30-60 jours si les marchandises ne sont pas en stock, c'est selon la quantité.
A: Oui, nous pourrions offrir l'échantillon gratuitement, mais nous devons payer le coût du fret.
A: Paiement <= 1000USD, 100% à l'avance. Paiement> = 1000USD, 30% T / T à l'avance, solde avant expédition.
Si vous avez une autre question, n'hésitez pas à nous contacter
Tube en acier de précision DOM DOM de tuyaux en acier au carbone Torich ASTM A513
Ningbo, Zhejiang, China
Envoyez votre demande à ce fournisseur