1 / 1
Model No. : | TY-SP2704B |
---|---|
Brand Name : | VRD |
Huaian, Jiangsu, China
Description du produit
Centre d'usinage CNC avec double colonne TY-SP2704B
1.Brand:HHT
2.cert.: J'aiAINSI, CE
3.max.Load:16000 kg
4. tableau taille : 2300 * 4000mm
5.X/Y/Z voyage : 4200/2700/1000 mm
6. CNC contrôleur : SIEMENS, FANUC MITSUBISHI
Item Model | Unit | TY-SP2704B | ||
table size(WxL) | mm | 2300×4000 | ||
X-axis travel | mm | 4200 | ||
Y-axis travel | mm | 2700 | ||
Z-axis travel | mm | 1000 | ||
size of machine | mm | 2700 | ||
spindle nose to table | mm | 260~1260 | ||
table-T-slot | mm | 11-28×200 | ||
spindle taper | mm | BT50/190 | ||
spindle gear | rpm | highest speed 3000rpm | ||
spindle drive with ZFreducing belt drive | rpm | highest speed 6000rpm,reduction ratio 1:1, 4:1 | ||
spindle belt drive milling head | rpm | highest speed 6000rpm,reduction ratio 1:1 | ||
XYZ-axis ball-screw size | mm | 8020x6316x5010 | ||
X-axis rail size | mm | X axis three heavy duty roller liner guides 55 | ||
Y-axis rail size | mm | Yaxis two heavy duty roller liner guides 55 | ||
Z-axis rail size | mm | rectangle slide rail | ||
X/Y/Z axis rapid feed | m/min | 20x20x12 | ||
three axis working rapid speed | mm/min | 1-8000 | ||
positioning accuracy | mm | ±0.02 | ||
repeat positioning accuracy | mm | ±0.005 | ||
control system | / | MITSUBISHI/FANUC/SIEMENS | ||
spindle motor | kw | 22 | ||
X-axis servo-actuator | nm | 60 | ||
Y-axis servo-actuator | nm | 30 | ||
Z-axis servo-actuator | nm | 40 | ||
pneumatic source requirement | Kg/Cm2 | 6 | ||
table load capacity | kgs | 16000 | ||
power requests | kva | 45 | ||
weight(approx) | kgs | 52 | ||
We reserve the rights on the designing, colors, specification and termination of use of our products. Changes to these factors will not be notified. | ||||
Standard accessaries | Special accessaries | |||
1,full closed guard(without top cover) | 1, deep honing Coolant thru tool holder device | |||
2,column postposition carrier | 2,CNC rotatry table | |||
3,Double oil hydraulic cylinder balance system | 3,Electrical box air-conditioning device | |||
4,Oil-water separator | 4,Optical Scale ffedback system | |||
5,Cutting fluid cooling system | 5,High pressure coolant thru spindle | |||
6,Double spirals type chip conveyer | 6,Cutting fluid automatic system | |||
7,Crawler type chip removal/ debris collector car | 7,Automatic tool length measurement systems | |||
8,Working light and daylightlamp | 8,Automatic work-piece measurement systems | |||
9,Program end alarm light | 9,oil-pressure clamping auto 90°lateral milling head | |||
10,water cannons and air gun for cleaning | 10,oil-pressure clamping maunal 90°lateral milling head | |||
11,Rigid tapping | 11,lengthening milling head | |||
12,RS232C port | 12,gear type milling head | |||
13,Portable hand wheel | 13,milling head with five faces | |||
14,Spindle cooling system | 14,Erect milling head | |||
15,Electrical box heat exchanger | 15,manual Universal milling head | |||
16,foundation pad and balance adjustment pad | 16,straight transfer milling head | |||
17,One set of tool and adjustment box | 17,ZF speed reducer+straight transfer milling head | |||
18,Operation and maintenance instructions | ||||
19,automatic power turn-off device | ||||
20,precision check report | ||||
21,System Operation and maintenance instructions | ||||
22,Outside varying voltage(220/380V) | ||||
23,Manual/program spindle debris device | ||||
24,Central lubricating system |
Huaian, Jiangsu, China
Envoyez votre demande à ce fournisseur